10-Pack 0.2 Modulus Brass Micro Gears – 10T To 60T, 0.8/1/2mm Bore, For RC Cars & DIY Models

1 / 4

Description

This 10-piece set of brass micro gears covers a bunch of popular tooth counts and bore sizes for your miniature projects.
The modulus is 0.
2, which is a common pitch for small RC cars, robotics, and DIY model assemblies.
You'll get a mix of gears with teeth ranging from 10T up to 60T, and bore diameters of 0.
8mm, 1mm, and 2mm, with thicknesses from 1.
1mm to 2mm.

Here's what you get: gears in configurations like 10T with 0.
8mm or 1mm bore, 12T, 15T, 20T (with 1mm or 2mm bore), 24T, 30T (1mm or 2mm), 40T (1mm or 2mm), and even a 60T gear with a 2mm bore.

Jual 10PCS Modulus 0.2 Mini Brass Spur Gear 10T 12T 15T 20T 30T 40T Pinion Hole Dia.0.8/1/2mm Gears DIY RC Car Motor Shaft Connector - Kota Administrasi Jakarta Utara - Denzidan Store

The outer diameters vary by tooth count—for example, a 10T gear is about 2.
4mm OD, while a 60T is around 12.

Modulus 0.2 Mini Gear 10PCS Modulus 0.2 Mini Brass Spur Gear Set – 10T/12T/ 15T/20T/30T/40T Pinion, 0.8/1/2mm Hole Dia. For RC Car Motor

3mm.

10PCS Modulus 0.2 Mini Brass Spur Gear Set – 10T 12T 15T 20T 30T 40T Pinion, Hole Dia. 0.8/1/2mm, DIY RC Car Motor Shaft Connector For Hobby Models

They're precision brass, so they mesh well and run smooth.

These little guys are perfect for connecting motor shafts to axles in tiny vehicles, robotic arms, or any micro transmission system.

0.4M 30T Brass Gear 30 Teeth with 3/4/5MM Hole M3 M4 Screw for DIY Model Steps Gear

The brass material is durable and resists wear, so they'll hold up to the speeds and loads of small motors.

2.5 Mod Spur Gear 10T To 30T Transmission Gear 25mm Thick 45# Steel

Since they're tightly fitted, you might need to press them onto shafts or use a tiny setscrew—though these don't come with setscrews, just the bare gears.

If you've ever been frustrated by not finding the right size gear for your project, this set gives you a bunch of common sizes to work with.
Whether you're upgrading an RC car, building a mini robot, or repairing a tiny mechanism, these brass gears are a solid addition to your parts bin.
10 pieces, multiple sizes—good value for the tinkerer or model builder.